andriajah Fri Jun 2020 2 years ago
The correct procedures for putty, epoxy and basecoat applications
Following are the procedures for pitching, epoxy and the application of basecoat yaang right and details.
Procedures for the first applications for putty, epoxy and basecoat are;
Sand surface of the car body blisters that are approximately five centimeters of distance from blisters or defects, using sandpaper number 240. Sandpaper until completely flat until the old clear coat layer or tell the base paint on the old paint.
Procedures for Application of putty, epoxy and basecoat are the second correct; Clean the surface that has been sanded using a degreaser so that the putty can be optimally attached. Then putty until it is completely flat and solid, so that when sanding the surface of the putty, there are not too many pores or small holes that arise on the surface of the putty after the sanding.
Procedures for Application of putty, epoxy and the third correct basecoat; Amplas putty after it is completely dry with sandpaper number 240 and uses orbital sander (if any) for sanding this stage, there is no need to be too trimmed because there is still a subsequent sanding stage. After completing the rough sanding, continue using sandpaper number 360 using a flat piber or board. Sandpaper until the surface is no wave. After ensuring the surface of the putty is completely flat, the sandpaper again uses 600 sandpaper until a little free from the sandpaper before the putty rises. And to find out this article in full, please visit our site at www.cahayaabadi2012.com Tata Cara Aplikasi Dempul Epoxy Dan Basecoat Yang Benar tata cara pengecatan yang benar cara aplikasikan dempul yang benar cara aplikasikan epoxy yang benar cara aplikasikan basecoat yang benar dempul epoxy basegoat pengecatan cahaya abadi pengecatan mobil yang benar solusi tepat cat mobil mobil cat clear belajar cat belajar dempul belajar epoxy belajar basecoat belajar body repair cara ngecat secara detil cara ngecat mobil secara jelas belajar sulam cat mobil